By Michael | Last Updated
You may encounter the problem of iPhone stuck on Apple logo storage full during the update. Nothing can be done because the iPhone storage is full and the iPhone is stuck on Apple logo. Even you cannot turn on the iPhone to free up space on the iPhone. In this article, you can get the quick and easy guide to fix iPhone stuck on Apple logo storage full issue.
Why this issue happens on your iPhone? You can check the possible reasons below:
Your iPhone’s operating system (iOS) requires a certain amount of free storage to perform essential tasks during the boot process, such as loading system files, running diagnostics, and initializing apps. If the storage is completely full, there’s not enough space for these tasks, leading to the phone freezing on the Apple logo during startup.
When an iPhone boots up, it temporarily writes data and system logs to your storage. If there’s no available space for these temporary files, the system may fail to boot properly, causing it to get stuck in a loop.
An iPhone stuck on the Apple logo can occur if an iOS update or installation doesn’t have enough space to complete. iOS updates require additional storage to download, unpack, and install new system files. If the storage is too full, the update process may fail mid-way, leaving the device in an unbootable state.
Apps like social media, streaming, and messaging apps often accumulate large amounts of cache, temporary files, and media over time. When storage is critically low, the operating system might not have enough space to manage this data, especially during a restart or update.
If the storage is full and the system can't properly read or write to the file system during startup, it can cause iOS to malfunction. Corrupted or incomplete files can prevent the system from loading fully, resulting in the iPhone being stuck on the Apple logo.
If your iPhone cannot turn on because of the insufficient storage, you can use iSunshare iOS Repair Genius to fix the iPhone stuck on Apple logo issue and get the iPhone restarts to run smoothly. iSunshare iOS Repair Genius can quickly fix the iOS system and get iPhone back to normal without data loss.
Step 1: Open iSunshare iOS Repair Genius on your computer. Then select System Repair on the home page.
Step 2: There are two modes to repair the iPhone. You can choose Standard Mode to continue. If this cannot solve the issue, you can choose Advanced Mode to erase all data on the iPhone.
Step 3: Connect your iPhone to the computer and then click the Start button. Hit the Next button on the coming screen.
Step 4: Check your iPhone model and the firmware version. Then click the Download to get a firmware.
Step 5: Click the Repair button to repair the iPhone. Minutes later, you can check whether the iPhone has restarted and can access the system normally or not.
A simple force reboot can get your iPhone back to normal for a while. Then you can free up your iPhone storage space. Here's how to force restart different iPhones.
iPhone 8 and later: Press and release the Volume Up button, then press and release the Volume Down button. At last, press and hold the Side button and then release it when the Apple logo appears.
iPhone 7 and iPhone 7 Plus: Press and hold the Volume Down button and the Power (Sleep/Wake) button at the same time, then release both buttons when the Apple logo appears.
iPhone 6s and earlier: Press and hold the Power (Sleep/Wake) button and Home button simultaneously for a few seconds, then release both buttons when the Apple logo is displayed on the screen.
You can fix the iPhone stuck on Apple logo with full storage by updating and restoring your device. However, when your iPhone is stuck on the Apple logo screen and has no storage space, you cannot upgrade it. You need to make a backup because restoring your iPhone by this method will delete all the current data. iSunshare iSyncGenius is a great choice for you to backup iPhone data quickly and securely.
Step 1: Make sure you have the latest version of iTunes. Connect your iPhone to your computer with a USB cable.
Step 2: Launch recovery mode on your iPhone. Here's how toenter recovery mode for different iPhone models.
For iPhone 8 or later, including iPhone SE (2nd generation): Press and quickly release the volume up button. Press and quickly release the volume down button. Then, press and hold the side button until you see the recovery mode screen.
For iPhone 7 and iPhone 7 Plus: Press and hold the side and volume down buttons at the same time. Keep holding them until you see the recovery mode screen.
For iPhone 6s or earlier, including iPhone SE (1st generation): Press and hold both the Home and the side buttons at the same time. Keep holding them until you see the recovery mode screen.
Tip: iOSBoot Genius is a free and useful tool that can help you enter or exit recovery mode with one click. If you have trouble entering recovery mode manually, this software is a good choice.
Step 3: After successfully entering the recovery mode, iTunes will recognize your device. Then, select the Restore option in the pop-up window. After the restore is complete, your iPhone will automatically restart.
One more tip: You can also use DFU mode to restore your iPhone with iTunes. Utilizing iTunes with DFU mode is one of the best techniques to restore your iPhone. However, your data will be lost when the process finalizes.
1. Can I fix iPhone stuck on Apple logo storage full with no computer?
You can try the force restart to get iPhone back to normal. But it will be difficult to fix this issue without a computer.
2. How much free storage space should I keep to avoid iPhone stuck issue?
To keep iPhone in smooth operation, you can keep at least 1-2GB of free storage on your iPhone. If your iPhone storage is free, remember to free up the space regularly.
3. Is it possible to get iPhone out of stuck status without losing data?
If your iPhone stuck on Apple logo due to full storage, you can try the force restart or a iOS system repair software, such as iSunshare iOS Repair Genius, to fix the iPhone issues without data loss.
iSunshare iDevice Genius is a versatile tool that frees up space on your iPhone to make it faster and cleaner. It not only enables you to clean up crash logs generated by stuck or crashed apps, but also allows you to export or delete pictures or large files to free up space on your iPhone. It also allows you to uninstall all unused third-party apps on your iPhone to gain more space.
Step 1: Download and install iDevice Genius on your computer. Connect your iPhone to your computer with a USB cable. Make sure the newest iTunes has been installed on your computer.
Step 2: In the main interface of the software, click the Scan button to do a full analysis of how much space you can free up for your iPhone. You should not use the iPhone during the scanning process.
Step 3: After scanning, you can see how much storage space you can free up. You can click the Clean button to clean up crash logs, download file caches, and recording files. For pictures and large files, you can click the Clean button to export to your computer.
Step 4: In the Pictures interface, you can classify the pictures by Year, Month or Day. You can also double click or right click to preview the picture details. Select the pictures you want to export to your computer, then click the Export button and choose a storage location from your computer to save the pictures.
Step 5: Then, you can delete the unwanted pictures directly. Just select the pictures and click the Delete button. When the delete process is finished, you will see how much storage space have been released. You can perform the same steps above for large files on your iPhone.
Step 6: iDevice Genius can also help you to remove the third-party applications from your iPhone, simply select the Uninstall option on the left side of the software's main screen. Then click the Scan button on the right side.
Step 7: After scanning, it will list all your third-party apps with their version, application size, and document size. To free up more space, you can delete unused or unwanted apps by clicking the Uninstall button behind the app, and the app will be uninstalled immediately.
By following these steps, you should be able to fix an iPhone stuck on the Apple logo due to full storage. To prevent this issue happens again, it is better for you to regularly monitor the storage space, offload unused apps and delete unnecessary files, use iCloud storage option to manage photos and media.
